RMP 440 is not turning ON

RMP 210, 220, 440LE, 440SE, 440 Omni
Post Reply
Omidkk
Posts: 3
Joined: Fri Sep 16, 2016 6:02 am
Contact:

RMP 440 is not turning ON

Post by Omidkk » Wed Aug 16, 2017 8:25 am

I am trying to turn on segway, but nothing happens, I thought maybe it is because of battery charge, I put it on charge for 12h but still it is not working.
I attached faultlog.
https://www.dropbox.com/s/4giis5lcazem4 ... .html?dl=0

sdnalloh
Posts: 47
Joined: Tue Aug 07, 2012 1:27 pm
Contact:

Re: RMP 440 is not turning ON

Post by sdnalloh » Fri Aug 18, 2017 9:54 am

Looking through your faultlog, I'd suggest trying these things:
  1. Verify that the E-stop button is attached and has not been pressed.
  2. Unplug anything connected to the RMP.
  3. Power ON the RMP using the ON/OFF switch.

Omidkk
Posts: 3
Joined: Fri Sep 16, 2016 6:02 am
Contact:

Re: RMP 440 is not turning ON

Post by Omidkk » Mon Aug 28, 2017 9:41 am

sdnalloh wrote:Looking through your faultlog, I'd suggest trying these things:
  1. Verify that the E-stop button is attached and has not been pressed.
  2. Unplug anything connected to the RMP.
  3. Power ON the RMP using the ON/OFF switch.
Thanks for reply,
E-stop is not connected to extract fault data, because I need to connect D pin to E.
I did these steps which you mentioned but, it does not have any effect on it.
It is not turning on, when I am connecting it to pc via usb, red led starts to blink, and when I am connecting D to E red and green led starts to blink.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests