Xbox 360 connection to the RMP in linux version

RMP 210, 220, 440LE, 440SE, 440 Omni
Post Reply
xizhang
Posts: 5
Joined: Sun Jul 31, 2016 7:49 am
Contact:

Xbox 360 connection to the RMP in linux version

Post by xizhang » Tue Jul 25, 2017 3:47 am

Hello, Dear Segway team,

I am trying to use the raspberry pi 3 to control the rmp via xbox 360. I following the instruction in the forum (http://rmp.segway.com/viewtopic.php?f=9&t=83). I have successfully installed the xbox driver in the linux system. And the controller works with the raspberry pi. But the problem is that whenever i run the rmp_demo, the pump up shows the rmp cannot detect the controller (Xbox 360). Luckily the mouse works. I try to deal with this, but it didn't work out. What kinds of problems it would be? Could you help me out? Thank you so much.

Best Regards,
Zhang

xizhang
Posts: 5
Joined: Sun Jul 31, 2016 7:49 am
Contact:

Re: Xbox 360 connection to the RMP in linux version

Post by xizhang » Tue Jul 25, 2017 3:55 am

Sorry forget telling that the robot I used is RMP 440 LE

xizhang
Posts: 5
Joined: Sun Jul 31, 2016 7:49 am
Contact:

Re: Xbox 360 connection to the RMP in linux version

Post by xizhang » Tue Jul 25, 2017 10:06 am

Ok, I solve the problem. Actually, the problem is in the file "rmp_demo_ocu.py" line 244. The "Xbox 360" is misspelled as "X-Box 360" in the original code.

sdnalloh
Posts: 47
Joined: Tue Aug 07, 2012 1:27 pm
Contact:

Re: Xbox 360 connection to the RMP in linux version

Post by sdnalloh » Tue Jul 25, 2017 10:11 am

Thanks for posting the solution!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest