Power external devices from RMP battery

RMP 50, 50XL, 100, 200, 400
Post Reply
tadele
Posts: 5
Joined: Wed Oct 31, 2012 1:36 pm
Contact:

Power external devices from RMP battery

Post by tadele » Wed Jul 31, 2013 10:59 am

I am working on RMP 50 omni platform with a dual payload power and want to add external devices that draw power from the RMP. How can I do that?

ChrisC
Posts: 43
Joined: Fri Apr 20, 2012 8:22 am
Contact:

Re: Power external devices from RMP battery

Post by ChrisC » Wed Jul 31, 2013 3:58 pm

On the underside of the platform, you will find 2 pair of panel mounted binding posts on each of the user interface boxes. Each red (positive)/black (negative) pair of binding posts provides discrete 100 or 150W channels @ 5, 12, 24, or 48VDC (depending on what configuration was ordered). Use the two panel mounted toggle switches next the binding posts on both of the user interface boxes to energize the corresponding DC output channels. This photo is an example of what to look for.
RMP 50 Omni Payload Power Binding Posts and Toggle Switch.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests