transmission ratio question

Issues related to communication with the RMP
Post Reply
luca.lucci
Posts: 12
Joined: Wed Jul 25, 2012 10:09 am
Contact:

transmission ratio question

Post by luca.lucci » Wed Oct 03, 2012 5:08 am

Hello,
in the CCU interface document I notice the RMP_CMD_SET_TRANSMISSION_RATIO command. I suppose that it is related to mechanical constraints. How can I know my transmission ratio? I have an rmp 440 LE with non inverted gearbox.

Thank you

ChrisC
Posts: 43
Joined: Fri Apr 20, 2012 8:22 am
Contact:

Re: transmission ratio question

Post by ChrisC » Thu Oct 04, 2012 3:44 pm

Hello,

The default value of 24.2667 should be used unless customer modifications are made that alter the standard RMP transmission ratio. All current and existing RMP models utilize gearboxes/transmissions with 24.2667:1 reduction.

-Chris

luca.lucci
Posts: 12
Joined: Wed Jul 25, 2012 10:09 am
Contact:

Re: transmission ratio question

Post by luca.lucci » Thu Oct 04, 2012 5:22 pm

Hi Chris,
thank you for the aswer. Maybe I have some problem with tourque. Which gearbox do you have available? Can I upgrade my rmp 440le on my own?

Craig
Posts: 58
Joined: Thu Jan 26, 2012 3:02 pm
Contact:

Re: transmission ratio question

Post by Craig » Tue Oct 09, 2012 11:48 am

We only offer the standard gearbox with the 24.26 ratio
Craig Shaffer
Principal Engineer

STANLEY INNOVATION, INC
www.stanleyinnovation.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest