Why doesn’t the RMI Demo USB dialog box give any status info

Issues related to communication with the RMP
Post Reply
Craig
Posts: 58
Joined: Thu Jan 26, 2012 3:02 pm
Contact:

Why doesn’t the RMI Demo USB dialog box give any status info

Post by Craig » Fri Mar 09, 2012 11:00 am

Make sure the USB cable is plugged into the RMP and the controlling computer prior to launching the RMI Demo and before powering on the RMP. If the RMP doesn't see a USB host on power up, it switches to the CAN interface and disables the USB interface. If the RMP is shutdown or the USB is disconnected then you must restart the sequence (i.e. re-launch RMI Demo once the USB has been reconnected and the RMP is turned on). USB -> RMP -> App will work and so will RMP -> USB -> App but any sequence that starts the application before the RMP or USB will NOT work.
Craig Shaffer
Principal Engineer

STANLEY INNOVATION, INC
www.stanleyinnovation.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest