Search found 7 matches

by esaad
Fri Jun 20, 2014 8:49 pm
Forum: Centralized Controller Platforms
Topic: Bad propulsion battery
Replies: 1
Views: 4523

Bad propulsion battery

My propulsion batteries on RMP 440 FLEX-OMNI no longer hold the charge, i.e. they discharge very fast. How do i figure which ones of the 4 batteries are bad to replace them? or do I need to replace all 4 together? I use the python RMP demo program which shows the % state of charge of all propulsion ...
by esaad
Fri Oct 11, 2013 6:26 pm
Forum: Centralized Controller Platforms
Topic: Windows 8 driver
Replies: 6
Views: 11529

Re: Windows 8 driver

The steps in the microsoft link in my prior reply worked: From the Metro or Desktop, bring up Charms by mousing over to the right of the screen Go to Settings More PC Settings Power Hold shift down, and click Restart Trouble shoot Advanced options Startup Settings Restart 7 for 'Disable driver signa...
by esaad
Fri Oct 11, 2013 1:20 pm
Forum: Centralized Controller Platforms
Topic: Windows 8 driver
Replies: 6
Views: 11529

Re: Windows 8 driver

No, unlike Windows 7, it did not give me an option to continue with the install. However, I just found the following fix for this issue that I will try out. http://answers.microsoft.com/en-us/windows/forum/hardware/how-can-i-force-windows-8-to-install-non-digitally/da779859-9d57-4f38-ab2e-22ab8b31c0...
by esaad
Thu Oct 10, 2013 2:39 pm
Forum: Centralized Controller Platforms
Topic: Windows 8 driver
Replies: 6
Views: 11529

Windows 8 driver

Is there a Windows 8 driver for RMP 440 FLEX-OMNI? When I try to install the driver from RMP_APP_INSTALLER_040813 on Windows 8, I get an error: "The third-party INF does not contain digital signature information."
by esaad
Sat Dec 01, 2012 12:47 am
Forum: Centralized Controller Platforms
Topic: RMP 440 OMNI PWM commanding
Replies: 4
Views: 8167

Re: RMP 440 OMNI PWM commanding

Great! thanks.
by esaad
Wed Nov 28, 2012 6:19 pm
Forum: Centralized Controller Platforms
Topic: RMP 440 OMNI PWM commanding
Replies: 4
Views: 8167

Re: RMP 440 OMNI PWM commanding

Would you please provide details on connectivity to Spektrum 6 channel air receivers. What is the mapping between PWM pins 2-9 on J7 connector and Spektrum channels: Throttle, Aileron, Elevator, Rudder, Gear, Aux1? Do I need to put the Segway in tractor mode before controlling with the radio? Any ot...
by esaad
Wed Nov 28, 2012 5:02 pm
Forum: Centralized Controller Platforms
Topic: RMP 440 OMNI PWM commanding
Replies: 4
Views: 8167

RMP 440 OMNI PWM commanding

I have an RMP 440 OMNI. I am trying to command it using PWM signals through connector J7 on the CC as described in section 3.3 of the Hardware Interface Document. I am not using a hobby RC but I am generating the PWM signals using a microcontroller. Would you please provide details of the required P...