I am trying to turn on segway, but nothing happens, I thought maybe it is because of battery charge, I put it on charge for 12h but still it is not working.
I attached faultlog.
https://www.dropbox.com/s/4giis5lcazem4 ... .html?dl=0
RMP 440 is not turning ON
Re: RMP 440 is not turning ON
Looking through your faultlog, I'd suggest trying these things:
- Verify that the E-stop button is attached and has not been pressed.
- Unplug anything connected to the RMP.
- Power ON the RMP using the ON/OFF switch.
Re: RMP 440 is not turning ON
Thanks for reply,sdnalloh wrote:Looking through your faultlog, I'd suggest trying these things:
- Verify that the E-stop button is attached and has not been pressed.
- Unplug anything connected to the RMP.
- Power ON the RMP using the ON/OFF switch.
E-stop is not connected to extract fault data, because I need to connect D pin to E.
I did these steps which you mentioned but, it does not have any effect on it.
It is not turning on, when I am connecting it to pc via usb, red led starts to blink, and when I am connecting D to E red and green led starts to blink.
Who is online
Users browsing this forum: No registered users and 6 guests